How Do You Change a Car Tire?

Regardless if you have a flat tire or it is almost bald, you may want to change your tires by yourself. This can save both time and money, as you won’t have to wait around on the side of the Washington, PA roads. Furthermore, it’s important to learn how to change tires yourself so you’re not driving around on unsafe tires in Elm Grove Chrysler Dodge Jeep Ram. Learn more about how to change a car tire with the experts at Elm Grove Chrysler Dodge Jeep Ram! For more information, feel free to contact us anytime!

Changing a Tire

It’s quite simple to change the tire on your Chrysler, Dodge, Jeep, Ram, Wagoneer vehicle, however, it’s important to have the proper tools handy. You should also review your owner’s manual to make sure you know exactly what the manufacturer recommends for tire changing. Let’s take a look at how to change a car tire on any vehicle below:

1. When on the side of the road around Steubenville, OH, the first thing you should do is move off to a safe place and put on your hazard lights.
2. Prior to changing your tire, put the parking brake on and place wheel wedges behind the tires to prevent any rolling.
3. Take the hubcap off and loosen the lugnuts.
4. Place the jack underneath the frame, raise the vehicle, and remove the lugnuts.
5. Remove the flat tire and replace it with either a new or spare tire.
6. Put the lug nuts back on and tighten them. You can now lower the vehicle back onto the ground.

How Often Should You Change Car Tires?

How often to change your car tires depends on how often they are rotated. When rotated regularly, you can extend the life of your tires significantly, as they wear more evenly. However, you should still check your tire pressure frequently. In the case that your tires are bald or the tread has worn excessively, it is time for new tires. It’s a good rule of thumb to schedule your tire rotation when you get your oil changed.

Putting Air in Your Tires

When learning about changing a tire, you may wonder how to put air in your tires. You can either purchase an air pump or stop at a gas station, as they often have them handy. Let’s take a look at how to put air in your tires:

• Park near the air compressor and ensure that the hose can reach each tire.
• Take the tire valve off of the first tire.
• Use a tire gauge to check the air pressure. We recommend doing this at home, as the heat from driving can cause the tire to expand, providing you with a false reading.
• Place the air hose over the tire valve in short bursts, and continuously check the tire gauge, as you don’t want to overfill them.

How Far Can You Go on a Flat Tire?

After you’re done changing a tire, you might wonder how long you can drive on a spare. The spare is just meant to get you off the side of the road and to a trusted Wheeling dealership for repair. You should not drive on your spare tire for more than 50 miles. You should also not drive on it at high speeds, we recommend below 50 mph.

Visit the Elm Grove Chrysler Dodge Jeep Ram Service Center to Learn More!

Now that you know how to change a car tire, come visit the Elm Grove Chrysler Dodge Jeep Ram service department to schedule your regular tire rotation. If you need new tires, feel free to contact our parts department, as take advantage of our specials to save near Martins Ferry, OH!